产品信息 - rtv2 mold making silicone rubber for cement artificial stone mold->Rubber Products

添加会员

求助

Dongguan Guochuang Organic Silicone Material CO.,LTD

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

rtv2 mold making silicone rubber for cement artificial stone mold

产品分类 :

能源及原料->塑膠,橡膠,包裝材料->橡膠產品

rtv2 mold making silicone rubber for cement artificial stone mold

产品规格

Model No: C-830

Country	CN
Brand	Guochuang silicone
Materials	liquid silicone rubber
Color	translucent
Packing	1KG /2KGS /5KGS /10KGS /20KGS /25KGS /200KGS /drum
Minimum Order	200 KG
Payment Term	3~5 days after payment
Hardness	30 shore A
Mixing ratio	100:2
Feature	good flowability low shrinkage high heat resistant

产品描述

Culture stone liquid silicone rubber is condensation cure silicone rubber for mold making. The silicone rubber will be cured under room temperature, It is two components . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability.

Characteristics of rtv2 mold making silicone rubber for cement artificial stone mold
An exceptional fluidity and good operability, easy to demold
Good tensile strength and tear strength
Soft hardness
Copy detailed pattern
Good flexibility
Eco friendly
Long shelf time &lifetime

Application of rtv mold making silicone rubber for cement artificial stone mold
Culture stone mould making liquid silicone rubber is perfect molding material. it is suitable to make mold for concrete stone, cement casting , gypsum decocations, plaster product, resin craft, soap,candle, bronze casting, wax, crystal, tyre mold ,shoe mold ,clay casting ,soap mold,ceramic casting ,etc..

Silicone rubber is mainly suitable middle sized product and big size with simple pattern
Using instructions of rtv mold making silicone rubber for cement artificial stone mold
Step one Prepare and clean the prototype.
You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material(like cardpaper) to make a frame for to surround the prototype. The frame is no need ,if we make the mold by brushing way .

Step two Take the silicone and catalyst as the ratio ,mix the silicone rubber and catalyst evenly.
Notes Molding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. What’s more, the finished molds will have a short life. All of these will cause a waste of silicon rubber.

Step three Vacuum pumping
After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.

Step four Pouring cast or brushing cast
After released the bubble, we can pour/brush the silicone rubber on the prototype
Notes Please finished all the steped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available.So,we have to pay attention to the pot life and curing time.

其他类似产品

platinum two component silicone rubber prices for gypum mould making


[ 返回产品型录 ]

Commerce 会员: 请登录您的帐号跟口令,系统将为您填入您的相关资料

帐号:

口令:

记住我的帐号


	填写下列表格并寄送询问函．所有的询问信函将会自动寄发给你想联络的公司

	主題
	內容	（请勿输入公司名称、Email、电话、传真、网址）

公司简介:

* 公司名称

*E-mail

*国家

*联络人

网址

*电话

- -

传真

- -

*邮递区号

*城市

*街道地址

*企业形态

批发商出口商进口商制造商
大盘商零售商代理商 Retrofitter 使用者
其他, 请详细说明:

*安全口令


请输入所显示的安全口令