产品信息 - Aluminium conductor steel reinforced->acsr cable scrap

添加会员

求助

Anhui Reliable Meter Co.,Ltd

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

Aluminium conductor steel reinforced

产品分类 :

冶金礦產->重金屬->鋼芯鋁纜廢料

产品规格

Model No: al

Country	CN

产品描述

Type: High Voltage Application: Overhead Conductor
Material: Aluminum Conductor Material: aluminium and steel Application:
overhead overhead: conductor certificates: ISO9001 ISO14001

ACSR cable

Application:

AAC,AAAC,ACSR,AACSR&ACAR conductor widely used in power transmission lines with
various voltage levels.

ACSR is widely used in power transmission lines with various voltage levels.

It has the advantages as high mechanical strength, good conductivity, corrosion
resistance, easy to set up, high temperature resistance,
simple structure, convenient installation and maintenance, large transmission
capacity and is also suitable for laying across rivers and valleys where special
geographical features exist.

Construction:
The combination of the aluminum and steel in the conductor design offer efficient conductivity and high tensile strength, making ACSR the most economical solution for overhead power transmission and distribution projects.We have obtained certificates of ISO9001, ISO14001.

Specification:
All the products can perfectly meet requests of different standards.At the same time, we can design and manufacture special cables according to the required standards of customers, such as: GB, IEC, BS, ASTM, JIS, DIN and so on.

Since they have such good characteristics as simple structure, convenient installation and maintenance, low cost for the line, large transmission capacity and are also suitable for laying across rivers and valleys where special geographical teatures exist.

1. Specification:

(1) all aluminium conductor (AAC)
(2) all aluminimum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminimum conductor aluminimum clad steel reinforced(ACSR/AW)
(6)rear earth aluminimum conductor steel reinforced(ACSR/RE)
(7)aluminimum conductor aluminimum alloy reinforced(ACAR)

2. Elative manufacturing standards: IEC83, IEC1089, 31, B232, BS215, DIN48204.

1). Standard: IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182.

2). Specification: ACSR is composed by bare concentric-lay-stranded galvanized
steel wire(s) with aluminum wires surrounded by one or more layers of helically.
Greased ACSR can also be supplied.

3). Application: ACSR is widely used in overhead electric power transmission and
distribution lines with various voltage levels.

All Aluminum Conductor(AAC)& Aluminum Conductor Steel Reinforced(ACSR))for ASTM (AAC, ACCR, AAAC, ACSR) Generally Confirming to IS 398 (Part-I, II, IV), IEC-228

(AAAC) Conductor as per ASTM-B-399-1992
(AAAC) Conductor as per BS-3242-1970
(AAAC) Conductor IS: 398-IV-1994
(ACSR) as per ASTM-B-233-1992
(AAC) as per BS-215-1-1970
(AAC) as per IS-398-1: 1976
(AAC) as per ASTM-B-231-1990
(ACSR) as per IS: 398-II: 1976 & IS: 398-V: 1992
(ACSR) BS-215-II-1970
(AACSR) as per IEC-1089-1191

AAC(All aluminum conductor) are suited for overhead power line.

We can supply this conductor according to different recognized standards, such as IEC61089, BS215, BS EN 50182: 2001, STM B231, CSA C49, DIN480201, JIS C3109, customer special specification also can be satisfied.

ACSR or ACSR cable or ACSR conductor used for Overhead electrical distribution and transmission lines for distributing power.

Applications:

Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity.

Construction:

Aluminum alloy 1350-H-19 wires, concentrically stranded about a steel core. Core wire for ACSR is available with class A, B, or C galvanizing; ""aluminized"" aluminum coated (AZ); Or aluminum-clad (AW). Additional corrosion protection is available through the application of grease to the corer or infusion of the complete cable with grease.

Notes:
Resistance is calculated using ASTM standard increments of stranding and metal
conductivity of 61.2% IACS for EC (1350) and 8% IACS for steel. AC (60Hz)
resistance includes current dependent hysteresis loss factor for 1 and 3 layer
constructions.

Current ratings are based on 75oC conductor temperature, 25oC ambient, 2ft/s
wind, 96/watts/sq. Ft sun, 0.5 coefficients of emissivity and absorption.


[ 返回产品型录 ]

Commerce 会员: 请登录您的帐号跟口令,系统将为您填入您的相关资料

帐号:

口令:

记住我的帐号


	填写下列表格并寄送询问函．所有的询问信函将会自动寄发给你想联络的公司

	主題
	內容	（请勿输入公司名称、Email、电话、传真、网址）

公司简介:

* 公司名称

*E-mail

*国家

*联络人

网址

*电话

- -

传真

- -

*邮递区号

*城市

*街道地址

*企业形态

批发商出口商进口商制造商
大盘商零售商代理商 Retrofitter 使用者
其他, 请详细说明:

*安全口令


请输入所显示的安全口令