产品信息 - engine carbon cleaning equipment->automobiles maintenance

添加会员

求助

Xiamen Shengbin Energy&Technology Co.,LTD

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

engine carbon cleaning equipment

产品分类 :

交通運輸->其他->汽車維修

产品规格

Model No: SB78

Country	CN
Brand	SB
Materials	metal
Size	469590CM centimeters
Weight	50kg
Color	blue
Packing	wooden box
Minimum Order	10pcs
Payment Term	t/t
QTY/CTN	1pcs
G.W./CTN	100kg(about),packing in wooden box
CTN SIZE:	489792CM

产品描述

Car carbon removal machine

SIZE: 46*95*90CM
QTY/CTN: 1PC
G.W./CTN: 100kg(about),packing in wooden box
CTN SIZE: 48*97*92CM
One year warranty

One of the most environmental in the world
Clean carbon for your car by new teachnology and energy
The material of the energy(Browns Gas) is water
Low cost, maximum Economy
non-pollution!
Suitbale for many kinds of car
Restore the car power, quickly speed!!

Description:

principle of work
The main energy is water, splitting water into hydrogen and oxygen, hydrogen as energy, oxygen as combustion, through the air inlet into the car engine, and gasoline, air mixed firing, carbon ,attached to the engine and each corner, burning again, Then on the exhaust pressure, the gases is driven out the car. Automatic cleaning the internal engine,and restoring the engine horsepower

application
The machine can increase horsepower, save gasoline consumption, suitable for all kinds of size cars: small cars, minibuses,business purpose vehicles, Sedans and large cars etc...... exhaust emission meet national standards

scope of application
4s service shop, car repair factory and all kinds of breakdown service places can be used

operation explanation
1. Open the machine cover and air partition, connect the conduit to engine air inlet.
2. Open the outlet valve in the machine,let out all residual wastewater, and then close the outlet valve, check out whether the air valve is closed, if not, shut it down immediately , and then open the general power.
3 First start the car engine, and then close the general power. The machine begin to produce gases, adjust power time , for three cylinder of car output current should be adjusted to about 400, input should be in 6A, four cylinder of car output current should be adjusted at around 450, the input current should be in 9A, six cylinder car, output current should be in 550 or so, input current should be about 12A.(Auto Adjustment )
4. During the machine working, if add-water-light brighten, it mean unwatered that should be fill up with water then continue work.During working, do not open the cover to water.
When gas-pressure meter display 0.08 MPA, firstly start the engine then open the air outlet valve. When start working, the working time setting for 38 minutes, after 38 minutes, the machine will stop produce gas, at the moment, the input current is zero, and make noises continuously
after finish working, firstly close the H2 O2 gas air outlet valve, shut off the general power, take out H2 O2 gas input duct, and then insert it to the car original conduit, make the engine quickly operate a few seconds quickly, the carbon deposit will be let out from exhaust vent, exhaust air with a little water, then should be shut down engine (left)
7.operate conclusion: first start the car engine, and then opens the H2 O2 gas air outlet valve, End: first closes the H2 O2 gas outlet valve, shut off the general power then shut down the car engine.
8. The machine should be operated by professional people who have a certification

cautions
　1. before working, check whether the gasoline is enough, and water temperature no too high, because engine need idling 38 minutes but can't shut down at least during working
2.Around the machine, no fire, no flammable, no smoking
3.If need to interrupt operate during working, please turn off the general power,it can stop gas,then close the valve, and then closed the car engine.
4.During working, do not increase engine speed,do not step on the gas pedal,do not shut down engine.(Don't make the engine flameout)
5. In the process of working,if engine flameout(Do not start the engine immediately).At the moment, you should shut off the general power immediately, close H2 O2 gas air outlet valve, and take out the gas conduit, open the engine cover and air partition, And supply air with air pipe a few minutes, then your can work again according as the operation process.
6.If working time already more than the set time, 38 minutes, but dont stop gas automatically, please stop by manual operation.

其他类似产品