产品信息 - A234 WP11 Fittings->tube fittings

添加会员

求助

Hebei Haiwei Pipeline Co., Ltd

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

A234 WP11 Fittings

产品分类 :

機械與設備->五金及工具->其他->管件

产品规格

Country	CN
Materials	A234 wp11
Size	1/2" to 24"
Color	Black Painted
Packing	Plywood cases or pallets
Minimum Order	1 Pc
Payment Term	TT/LC
Deliver mode	By sea/land/air
Delivery term	CIF, CNF, FOB
Loading Port	Tianjin

产品描述

A234 WP11 FITTINGS

Hebei Zhongji manufacturer A234 WP11 fittings made from high quality alloy steel to ASTM A234 which can
be used in various piping systems. The advantages of butt weld include:
Welding a fitting to the pipe means that it is permanently leak proof.
The continuous metal structure formed between the pipe and fitting adds strength to the system.
Smoother inner surface and gradual direction changed reduce the pressure losses and turbulence and minimises the action of corrosion and abrasion.
A welded system utilises minimal space.
A234 WP11 Fittings Types
Elbows, Long Radius Elbow, Short Radius Elbow, Bend, Long Radius Bends, Piggable Bends, Tee, Equal Tee,
Reducing Tee, Cross, Reducer, Concentric Reducer, Eccentric Reducer, Pipe End Caps.

A234 WP11 Fittings Dimensions
A234 WP11 Fittings Weight

ASTM A234 Specification
Scope
ASTM A234 covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures.

Process
Killed steel, with forgings, bars, plates, sheet, and seamless or fusion-welded tubular products with filler metal added. Forging or shaping operations performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or by a combination of two or more of these operations.

Heat Treatment
After forming at an elevated temperature, fittings are cooled to a temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Heat treatment temperatures specified are metal (part) temperatures. Heat-treated fittings are to be treated according to paragraph 7 in Specification A960/A960M.

其他类似产品