产品信息 - HAITENG Customized Delrin/POM Machine Parts->chemical

添加会员

求助

Yangzhong Haiteng Fluorine Plastic Product Factory

回首页

公司简介

产品橱窗

影音视听

寄出询问函

联络我们

	Recommended Results

HAITENG Customized Delrin/POM Machine Parts

产品分类 :

化學->其他->化學製品

HAITENG Customized Delrin/POM Machine Parts

产品规格

Model No: POM Machine Part

Country	CN
Brand	HAITENG
Packing	Paper Box
Minimum Order	200
Payment Term	L/C,T/T,D/P

产品描述

HAITENG Customized Delrin/POM Machine Parts by CNC Lathe Machine


 


Characteristics 
-High surface hardness 
-Good wear resistance 
-Excellent machinability 
-Nice self-lubricating properties 
-Good dimensional stability 
-Low water absorption 
-Oil resistant 
-Work under the temperature of -40-100ºC


 
The common document files accepted are : *.pdf/*.dwg/*.IGS/*.step/*.prt/*.sldprt Just send the drawings to us, we will handle the rest for you.


 



Images


<img src="http://i.bosscdn.com/product/be/1d/a6/c3f32fdd2a46bcfdd82a572d58.jpg" title="POM Machine Parts" alt="POM Machine Parts" />


<img src="http://i.bosscdn.com/product/46/69/8d/86e88100c05150528655f5322d.jpg" title="Contact Info" alt="Contact Info" />


<img src="http://i.bosscdn.com/product/15/b1/4a/5186be98c198fa41fadac2e9f3.jpg" title="POM parts by CNC Machine" alt="POM parts by CNC Machine" />


 


Technical data sheet
<table border="0" cellpadding="0" cellspacing="0" style="width:704px;" class="tcs ke-zeroborder">
<tbody>
<tr>
<td>
PROPERTIES
</td>
<td>
Unit
</td>
<td>
Value
</td>
</tr>
<tr>
<td colspan="3">
I.Physical Properties
</td>
</tr>
<tr>
<td>
Density
</td>
<td>
g/cm3
</td>
<td>
1.45
</td>
</tr>
<tr>
<td>
Water absorption 24hrs
</td>
<td>
%
</td>
<td>
< 0.3
</td>
</tr>
<tr>
<td colspan="3">
II.Thermal Properties
</td>
</tr>
<tr>
<td>
Heat deflection temperature - HDT/A
</td>
<td>
ºC
</td>
<td>
110
</td>
</tr>
<tr>
<td>
Min. service temperature
</td>
<td>
ºC
</td>
<td>
-40
</td>
</tr>
<tr>
<td>
Max. service temperature
</td>
<td>
ºC
</td>
<td>
100
</td>
</tr>
<tr>
<td>
Thermal conductivity at 23 ºC
</td>
<td>
W/(K*m)
</td>
<td>
0.31
</td>
</tr>
<tr>
<td>
Coefficient of linear thermal expansion
</td>
<td>
10-4*K-1
</td>
<td>
1.2
</td>
</tr>
<tr>
<td>
Flammability Rating(6mm thickness)
</td>
<td>
-
</td>
<td>
HB
</td>
</tr>
<tr>
<td colspan="3">
III.Mechanical Properties at 23ºC
</td>
</tr>
<tr>
<td>
Tensile strength at yield
</td>
<td>
MPa
</td>
<td>
63
</td>
</tr>
<tr>
<td>
Tensile strength at break
</td>
<td>
Mpa
</td>
<td>
-
</td>
</tr>
<tr>
<td>
Elongation at break
</td>
<td>
%
</td>
<td>
31
</td>
</tr>
<tr>
<td>
Modulus of elasticity after tensile test
</td>
<td>
MPa
</td>
<td>
2,700
</td>
</tr>
<tr>
<td>
Modulus of elasticity after flexural test
</td>
<td>
MPa
</td>
<td>
-
</td>
</tr>
<tr>
<td>
Hardness - Shore D
</td>
<td>
 
</td>
<td>
83
</td>
</tr>
<tr>
<td>
Charpy impact strength
</td>
<td>
kJ/m2
</td>
<td>
N. B.
</td>
</tr>
<tr>
<td>
Friction coefficient
</td>
<td>
 
</td>
<td>
0.35
</td>
</tr>
<tr>
<td colspan="3">
IV.Electrical Properties  at 23ºC
</td>
</tr>
<tr>
<td>
Dielectric constant at 1 MHz
</td>
<td>
106Hz
</td>
<td>
3.8
</td>
</tr>
<tr>
<td>
Dielectric loss factor at 1 MHz
</td>
<td>
106Hz
</td>
<td>
0.005
</td>
</tr>
<tr>
<td>
Volume resistively
</td>
<td>
Ohm (Ω) * cm
</td>
<td>
>1013
</td>
</tr>
<tr>
<td>
Surface resisively
</td>
<td>
Ohm (Ω)
</td>
<td>
>1013
</td>
</tr>
<tr>
<td>
Dielectric strength
</td>
<td>
kV/mm
</td>
<td>
40
</td>
</tr>
</tbody>
</table>
 
The machining process include below 
1.Turning: For parts which have high surface requirement, wide-head cutters are better. When processing thin walled and soft material, cutters like knife are recommended. 
2. Milling: When milling the surface, end-milling is more cost-effective than circular milling. For circular and forming cutter, it should have less than two cutter edges. In this case, the tolerance caused due to the edge vibration can be lowered to the minimum.   
3. Sawing: Thin saws are usually used to saw thick parts to avoid the heating caused by friction. It would be better to use sharp and big sawblade. 
4. Drilling: When drilling the solid materials, make sure to use sharp drill, otherwise the increasing pressure during drilling will cause material cracks. 
The common document files accepted are : *.pdf/*.dwg/*.IGS/*.step/*.prt/*.sldprt Just send the drawings to us, we will handle the rest for you.


 

<div>



<div align="left">
<img src="http://i.bosscdn.com/product/fa/5d/d3/ed6b2c340d8e5e34935edac468.jpg" title="ptfe manufacture" alt="ptfe manufacture" /><img src="http://i.bosscdn.com/product/8f/6f/80/c2ff557432a5d977846b0d620d.jpg" title="ptfe manufacturer in China" alt="ptfe manufacturer in China" /> 
</div>
</div>

 
plasticptfe.com

其他类似产品